使用穿條機時需要注意以下幾點?：

　　When using a threading machine, the following points should be noted:

　　操作前的準備工作：

　　Preparation before operation:

　　確保穿條機放置在平穩、干燥的場所，機器穩固。

　　Ensure that the threading machine is placed in a stable and dry place, and the machine is stable.

　　檢查機器是否正常運轉，是否有異常聲音或震動。

　　Check if the machine is operating normally and if there are any abnormal sounds or vibrations.

　　確認機器的電源是否正常，接地是否良好。

　　Confirm whether the power supply of the machine is normal and whether the grounding is good.

　　檢查機器的刀片是否鋒利，如有磨損需及時更換。

　　Check if the blades of the machine are sharp, and replace them promptly if they are worn.

　　操作前戴上手套和保護鏡，確保安全。

　　Wear gloves and protective goggles before operation to ensure safety.

　　操作過程中的注意事項?：

　　Precautions during operation:

　　避免將手指靠近切割區域，防止意外切傷。

　　Avoid placing fingers near the cutting area to prevent accidental cuts.

　　保持機器清潔干凈，定期清洗和潤滑，確保機器的正常運轉。

　　Keep the machine clean, regularly clean and lubricate to ensure its normal operation.

　　注意皮帶和機器的狀況，如有異常及時停機檢查。

　　Pay attention to the condition of the belt and machine, and stop the machine for inspection in a timely manner if there are any abnormalities.

　　維護與保養：

　　Maintenance and upkeep:

　　每班清潔機器，檢查鎖緊位置是否變化。

　　Clean the machine every shift and check if the locking position has changed.

　　每月潤滑小車位置、軸承位置，檢查同步帶張緊情況?

　　Lubricate the position of the car and bearings every month, and check the tension of the synchronous belt

　　本文由穿條機友情奉獻.更多有關的知識請點擊:http://m.c1890.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the threading machine For more information, please click: http://m.c1890.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.